*LED Modules for Qanba Gravity Buttons.
*Fits onto Qanba Gravity KS 30mm & 24mm, Qanba Gravity LX 30mm (not tested on Qanba Gravity LX 24mm but probably fits on them aswell)
(the modules were designed for 30mm. They fit onto 24mm buttons but have a slight offshoot on the sides where the LEDs are)
*Uses a JST-XH 4pin male connector on input and a 3pin on output. Pitch 2.5mm
*Uses 2x 100nF capacitors (package type 0805) and 2x WS2812 (package type 5050) type LEDs
